Buck Stove Model 21 Non-Catalytic Wood Burning Stove with Door
Crafted in a traditional time-honored design, this non-catalytic series features a dual top heat exchanger and an oversized glass door with an air wash system to minimize cleaning. Optional blower systems are available for each unit.
Model 21 Wood Stove
Model 21 can be used as a fireplace insert with optional insert kit, pre-fab insert, or as a freestanding unit with optional Queen Anne legs. With a heating range of 800 to 1800 square feet, with a BTU output of 11,079-28,901. The Model 21 is an ideal choice for zone heating or small homes or even mobile home installations.
A Buck Stove product gives you clean modern designs to show off the quality of the craftsmanship. Built to last and be aesthetically pleasing you're going to love using this Buck Stove Model 21 Non-Catalytic Wood Stove.
Made in the US with the best materials, you can be assured that you're getting beauty and durability all in one. The Buck Stove Model 21 is now approved for Washington & Oregon State Standards.
Features:
- Size: 22 Inches
- Color: Black
- Product Dimensions: 22" W x 20 1/4" H x 18 1/8" D
- Non-catalytic
- 1.6 cubic foot firebox
- Freestanding wood stove
- 70% overall efficiency rating
- Easy operation and low maintenance
- Three design options to choose from
- Approved for use in prefab and mobile homes
- Accommodates 11" logs front to back or 18" side to side
Technical Specifications:
- EPA Tested Output BTU/H: 11,079-28,901
- Average Overall Efficiency: 70%
- Average Particulate Emissions Rate: 1.7 g/h
- Recommended Heating Area: 800 - 1,800 sq. ft
- Maximum Log Size: 11"
*Please Note:This is for the stove only. Pedestal, Optional Trim Kit or Stove Legs are not included and sold separately.
Product Specification:
Model 21 Wood Stove |
FP 21, FP 21G, FP 21P |
Stove Dimensions |
20-1/4" H x 22" W x 18-1/8" D |
Cubic Feet Firebox Volume |
1.6 |
Weight |
317 lbs |
Firewood Length |
11" Front to back |
Minimum Fireplace Dimensions |
21" H x 23-1/4" W x 15" D |
Flue Size |
6"
|
Efficiency |
Up to 70% |
Hearth Pad Size |
33" W x 40" D |
Heat Capacity |
800 - 1,800 Sq. Feet |
EPA Tested Output BTU/H |
11,079-28,901 |
Emissions G/H |
1.7 |
Maximum CFM |
85 CFM (Optional Blower) |
Amperage Requirement |
1.1 Amps (Optional Blower) |
Blower Type |
Single |
Ashpan |
No |
Pre-Fab Approved |
Yes |
Mobile Home Approved |
Yes |
Installation Options |
Freestanding with optional Pedestal/Stove Legs or as Fireplace Insert |

Optional Accessories:
Pedestal
|
Outside Air Pedestal- FA P21B
- Color: Black
- Material: Steel
- Product Type: Stove Pedestal
- Facilitates the feed of combustion air in a freestanding application
- Designed for the Buck Model 21 wood stove
- Used in place of the standard stove pedestal
|
Trim Kits
|
Standard Trim Kit- PA FP21
- Color: Black
- Allows the installation of the Model 21 as an insert into an existing fireplace
- Designed to conceal the space between the insert and fireplace perimeter
- Three-piece design is easy to assemble
|
|
Oversize Trim Kit- PA FP2112
- Color: Black
- Allows the installation of the Model 21 as an insert into an existing fireplace
- Designed to conceal the space between the insert and fireplace perimeter
- Three-piece design is easy to assemble
- Oversize model for larger openings
|
Stove Legs
|
Regular Size Queen Anne Stove Legs - Black- FA FS2191
- Color: Black
- Material: Cast Iron
- Product Type: Stove Legs
- Elegant contoured leg design
- Designed for use with all Buck Stove wood and coal models
- Fits Buck gas Model 384
- Easy installation and can be removed if appliance configuration changes
|
|
Large Size Queen Anne Stove Legs - Black- FA FS9151
- Color: Black
- Material: Cast Iron
- Product Type: Stove Legs
- Elegant contoured leg design
- Designed for use with all Buck Stove wood and coal models (except Model 261)
- Easy installation and can be removed if appliance configuration changes
|
|
Regular Size Queen Anne Stove Legs - Gold- FA FS2191G
- Color: Gold
- Material: Cast Iron
- Product Type: Stove Legs
- Elegant contoured leg design
- Designed for use with all Buck Stove wood and coal models
- Fits Buck gas Model 384
- Easy installation and can be removed if appliance configuration changes
|
|
Large Size Queen Anne Stove Legs - Gold- FA FS9151G
- Color: Gold
- Material: Cast Iron
- Product Type: Stove Legs
- Elegant contoured leg design
- Designed for use with all Buck Stove wood and coal models (except Model 261)
- Easy installation and can be removed if appliance configuration changes
|
 |
Regular Size Queen Anne Stove Legs - Pewter- FA FS2191P
- Color: Pewter
- Material: Steel
- Product Type: Bay Window Kit
- Elegant contoured leg design
- Designed for use with all Buck Stove wood and coal models (except Model 261)
- Fits Buck gas Model 384
- Easy installation and can be removed if appliance configuration changes
|
|
Regular Size Queen Anne Stove Legs - Pewter- FA FS9151P
- Color: Pewter
- Material: Steel
- Product Type: Bay Window Kit
- Elegant contoured leg design
- Designed for use with all Buck Stove wood and coal models (except Model 261)
- Easy installation and can be removed if appliance configuration changes
|
Close Clearance Shields
|
Close Clearance Shield- MA 21Shield
- Color: Black
- Material: Steel
- Product Type: Stove Shields
- Allows reduced clearances for a tighter stove installation
- Designed specifically for the Buck Model 21, Model 74 wood stove
|
Downloads: